M9-WO-1016 Six Decimal Precision in Work Order

From BlythecoDev Wiki

Jump to: navigation, search

Contents

Synopsis

This Extended Solution to the standard MAS 90 MAS 200 Work Order module adds the ability to use up to six places of decimal precision in Work Order.

This Extended Solution was written for the express purpose of integration with Sage Software Extended Solution WO-1015: Extended Decimal Precision in Work Order. Without WO-1015 installed the effects of this Extended Solution will not be visible.

Installation

Before installing any Extended Solution, please verify that the version level referenced on your installation file is the same version level as your Sage 100 (MAS 90 MAS 200) installation. (For more information please call (800) 425-9843). It is recommended to have a complete and tested backup prior to installing any application on your Sage 100 (MAS 90 MAS 200) platform.

Extended Solutions Control Center

Installing any Extended Solution will add an Extended Solutions Control Center to the Sage 100 (MAS 90 MAS 200) Library Master Utilities menu. When you open the Control Center, the following options will be available:

  • Merge Installation Files
  • Extended Solutions Setup options

Custom Office

If you customize your Sage 100 (MAS 90 MAS 200), then you must run the Update Utility every time you install this Extended Solution.

Setup

Upon completion of software installation, you will need to access the Work Order Setup menu option screen. After the standard MAS 90 MAS 200 option screens have been displayed, a Setup screen for this Extended Solution will appear. Check the ‘Enable Extended Solution’ box to activate this Extended Solution (Figure 1).

WO-1016 Setup Options


You should visit this Setup screen after each upgrade or reinstallation of this Extended Solution.

Operation

This Extended Solution allows data from Extended Solution WO-1015: Extended Decimal Precision in Work Order to be retained in the standard MAS 90 MAS 200 Work Order module using an extended decimal format.

Upgrades and Compatibility

The installation CD is labeled with the version of the MAS 90 MAS 200 module for which this Extended Solution was prepared. This Extended Solution will check its compatibility with the appropriate MAS 90 MAS 200 modules and will be disabled if an incompatibility is found. If you upgrade your MAS 90 MAS 200 modules, this Extended Solution must be upgraded as well. Your MAS 90 MAS 200 dealer can supply this upgrade.


Documentation

Only changes made by Blytheco, LLC to the standard operation of Sage Software, Inc. MAS 90 MAS 200 have been documented in this manual. Operations not documented in this manual are standard procedures of MAS 90 MAS 200 processing. Standard MAS 90 MAS 200 processes, data entry screens, inquiry screens, reports, updates, etc., have not been changed unless addressed in this document.

Parts of this document may refer to the Specific Purpose Rule. When referenced, the described feature was developed for a specific client to its specifications and may not conform to generally accepted MAS 90 MAS 200 standards and procedures. These features may or may not benefit you in your application of MAS 90 MAS 200.


Acknowledgments

Copyright © 2010 Blytheco, LLC. MAS 90 and MAS 200 are registered trademarks of Sage Software, Inc.


Revision Note: 4.4

Personal tools
MediaWiki Appliance - Powered by TurnKey Linux